• Welcome to FinsandFur.net Forums.

trench set

Started by cmhanks, June 23, 2009, 11:47:39 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

cmhanks

I need some good pictures of a trench set. If anyone has one they will share.

FinsnFur

I'm not a trapper myself, cant say I've ever heard of a trench set. :confused:
Fins and Fur Web Hosting

   Custom built websites, commercial/personal
   Online Stores
   Domain Names
   Domain Transfers
   Free site maintenance & updates


http://finsandfurhosting.com

alscalls

I think I know what your talking about...try here....
http://cathrynscorne.proboards.com/index.cgi
Good folks over there and they would be glad to help. :wink:


I found this on here......
http://forum.sullivansline.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=4;t=000331


Start by making the trench. It should be about 3 feet long and about 6 inches wide.. It starts at ground level and tapers to about 6 to 8 inches deep at the deep end. Then at the deep end, dig a hole angling back into the ground. I usually bait the hole. Trap placement is at your discretion. But usually I put the trap in the trench about 12 inches back from the hole. Use some clods of dirt for stepping guides.

But in all honesty, this is a special occasions set. It's way too time consuming for everyday use. Under ordinary circumstances, a plain old dirthole or flat set will get the job done.
AL
              
http://alscalls.googlepages.com/alscalls

cmhanks

Thanks alscalls, Don't know why I missed it on Hal's sight but that sounds like what I am looking for. I like to try these different sets just to see if They work. I'am more a hobby trapper then a trapper.

alscalls

Your welcome keep stopping by...... :yoyo:
AL
              
http://alscalls.googlepages.com/alscalls