Here's a look at a Black walnut howler I put together with some cut offs I had laying around. Decided I had room to carve a coyote on it. So here's the progression:
(http://i3.photobucket.com/albums/y95/HuntnCarve/August%202016/Roughing%20In%201A_zpsuxlqmm3f.jpg) (http://s3.photobucket.com/user/HuntnCarve/media/August%202016/Roughing%20In%201A_zpsuxlqmm3f.jpg.html)
(http://i3.photobucket.com/albums/y95/HuntnCarve/August%202016/Roughing%20In%201B_zps8alifbg9.jpg) (http://s3.photobucket.com/user/HuntnCarve/media/August%202016/Roughing%20In%201B_zps8alifbg9.jpg.html)
(http://i3.photobucket.com/albums/y95/HuntnCarve/August%202016/Roughing%20In%201C_zpsgowkumdk.jpg) (http://s3.photobucket.com/user/HuntnCarve/media/August%202016/Roughing%20In%201C_zpsgowkumdk.jpg.html)
(http://i3.photobucket.com/albums/y95/HuntnCarve/August%202016/Start%20of%20Paint%201A_zpsbm6fref6.jpg) (http://s3.photobucket.com/user/HuntnCarve/media/August%202016/Start%20of%20Paint%201A_zpsbm6fref6.jpg.html)
(http://i3.photobucket.com/albums/y95/HuntnCarve/August%202016/Finished%20Call%201C_zps4lplz7bo.jpg) (http://s3.photobucket.com/user/HuntnCarve/media/August%202016/Finished%20Call%201C_zps4lplz7bo.jpg.html)
(http://i3.photobucket.com/albums/y95/HuntnCarve/August%202016/Finished%20Call%201D_zps6kgt6rpf.jpg) (http://s3.photobucket.com/user/HuntnCarve/media/August%202016/Finished%20Call%201D_zps6kgt6rpf.jpg.html)
Thanks for looking!
HuntnCarve
Dave
What's the price on that one? I got a couple guys coming from iceland to hunt again and it may be a good idea to give one of them that so they have something to look at and compare when they come running in. :wo:
Barry, I sent you a PM.
Dave
Well if you had answered here I'd of seen it sooner. :innocentwhistle:
Is that a Dremel type tool that you use for the carving?
Nasty,
That is a SCM air powered engraver. It spins at 400,000 RPMs and will cut anything (steel, glass, wood, etc). It will stall out if too big a cut is taken. Being air powered, there is no damage if it stalls. Where as, if you stall an electric motor, you will damage the motor. I've worn out a air turbine or two nearing 2 decades. Can't tell you how many calls I've carved over those years. :shrug:
Dave
Neat!
Beautiful :congrats: :congrats:
Pat
Awesome as always!!
Jim