FinsandFur.net Forums

Hunting => Game Calls => Topic started by: HuntnCarve on July 31, 2016, 10:24:56 AM

Title: Carved Coyote..
Post by: HuntnCarve on July 31, 2016, 10:24:56 AM
Here's a look at a Black walnut howler I put together with some cut offs I had laying around.  Decided I had room to carve a coyote on it.  So here's the progression:

(http://i3.photobucket.com/albums/y95/HuntnCarve/August%202016/Roughing%20In%201A_zpsuxlqmm3f.jpg) (http://s3.photobucket.com/user/HuntnCarve/media/August%202016/Roughing%20In%201A_zpsuxlqmm3f.jpg.html)

(http://i3.photobucket.com/albums/y95/HuntnCarve/August%202016/Roughing%20In%201B_zps8alifbg9.jpg) (http://s3.photobucket.com/user/HuntnCarve/media/August%202016/Roughing%20In%201B_zps8alifbg9.jpg.html)

(http://i3.photobucket.com/albums/y95/HuntnCarve/August%202016/Roughing%20In%201C_zpsgowkumdk.jpg) (http://s3.photobucket.com/user/HuntnCarve/media/August%202016/Roughing%20In%201C_zpsgowkumdk.jpg.html)

(http://i3.photobucket.com/albums/y95/HuntnCarve/August%202016/Start%20of%20Paint%201A_zpsbm6fref6.jpg) (http://s3.photobucket.com/user/HuntnCarve/media/August%202016/Start%20of%20Paint%201A_zpsbm6fref6.jpg.html)

(http://i3.photobucket.com/albums/y95/HuntnCarve/August%202016/Finished%20Call%201C_zps4lplz7bo.jpg) (http://s3.photobucket.com/user/HuntnCarve/media/August%202016/Finished%20Call%201C_zps4lplz7bo.jpg.html)

(http://i3.photobucket.com/albums/y95/HuntnCarve/August%202016/Finished%20Call%201D_zps6kgt6rpf.jpg) (http://s3.photobucket.com/user/HuntnCarve/media/August%202016/Finished%20Call%201D_zps6kgt6rpf.jpg.html)

Thanks for looking!

HuntnCarve
Dave
Title: Re: Carved Coyote..
Post by: pitw on July 31, 2016, 10:56:48 AM
What's the price on that one?  I got a couple guys coming from iceland to hunt again and it may be a good idea to give one of them that so they have something to look at and compare when they come running in. :wo:
Title: Re: Carved Coyote..
Post by: HuntnCarve on July 31, 2016, 12:04:00 PM
Barry, I sent you a PM.

Dave
Title: Re: Carved Coyote..
Post by: pitw on July 31, 2016, 01:59:47 PM
Well if you had answered here I'd of seen it sooner. :innocentwhistle:
Title: Re: Carved Coyote..
Post by: nastygunz on July 31, 2016, 03:34:08 PM
 Is that a Dremel type tool that you use for the carving?
Title: Re: Carved Coyote..
Post by: HuntnCarve on July 31, 2016, 04:25:51 PM
Nasty,

That is a SCM air powered engraver.  It spins at 400,000 RPMs and will cut anything (steel, glass, wood, etc).  It will stall out if too big a cut is taken.  Being air powered, there is no damage if it stalls.  Where as, if you stall an electric motor, you will damage the motor.  I've worn out a air turbine or two nearing 2 decades.  Can't tell you how many calls I've carved over those years. :shrug:

Dave
Title: Re: Carved Coyote..
Post by: nastygunz on July 31, 2016, 05:30:22 PM
Neat!
Title: Re: Carved Coyote..
Post by: coyote101 on August 01, 2016, 09:33:36 AM
Beautiful  :congrats: :congrats:

Pat
Title: Re: Carved Coyote..
Post by: Frogman on August 03, 2016, 03:00:15 PM
Awesome as always!!

Jim