Seems like every year when I hit my favorite sport shop up here, the spinners that I like to call my go-to spinners, gets chinsier and chinsier.
The blades are shrinking, the hook draw is getting shorter, the wire is thinner, the skirts are plastic :doh2: :iroll: wtf?
I got ticked off this year while attempting to fill up on these go to lures of mine. I decided to order everything I needed to whip up my own batch, and since the kids like to fish on top of the logs instead of under them, I bought heavily.
:eyebrownod:
2 packs of leaded and painted wires
2 packs of #5 hammered willows
A pack of #2 hammered colorados
A pack of #5 hammered colorados
A pack of 4mm beads
A pack of #3 nickel clevises
A pack #1 split rings
Couple packs of silicone skirts
I even had an empty Plano® box in the shop for all the components. :eyebrownod: :eyebrownod:
FINALLY!.....good spinners with good deep cup blades, and real skirts :congrats: :yoyo: :jump:
(https://forum.finsandfur.net/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv54%2FRiverBoy%2FFishing%2Fluremake1.jpg&hash=db115e09c009ff43c98fe7b632a2e23255fbeb85)
(https://forum.finsandfur.net/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv54%2FRiverBoy%2FFishing%2Fluremake3.jpg&hash=d0d36d101463e46339ffd6b8daa298929c1ac106)
(https://forum.finsandfur.net/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv54%2FRiverBoy%2FFishing%2Fluremake2.jpg&hash=4e65c41d388921250da113e5578c4bb11cb1198d)
I'll take a dozen please! :shrug:
Oh my god, would you believe that there's probably only two people in three surrounding counties that even know what a pair of split ring pliers are? :doh2: :innocentwhistle:
Where in the %$@* can a guy buy a pair of these? I went into town today and hit an Oriellys, Tractor Supply, Walmart, True Value, CarQuest, and Ace Hardware.
Not a single sole knew what split ring pliers were. They all tried selling me snap ring pliers. :loco:
Order this pair here...
http://www.ebay.com/itm/XURON-496-SPLIT-RING-PLIERS-RANKED-1-IN-FISHING-MAG-/180859645584?pt=LH_DefaultDomain_0&hash=item2a1c132e90
I have about 5 different pairs and this pair is by far the best. Most pairs I have are more expensive to but I always reach for this pair. I was watching a fishing show the other day and they were modifyin' some lures and I seen them using these pliers also so Im not the only fan of them.
Your spinners look great!! I threw some Spinners together yesterday...
(https://forum.finsandfur.net/proxy.php?request=http%3A%2F%2Fi568.photobucket.com%2Falbums%2Fss124%2Fdenverdf%2FSpinners.jpg&hash=3a054d5e5931db3ca523741338a442c5bea172da)
I'll send ya a pair just send em back when ur done :shrug:
http://www.hagensfish.com/
http://www.mudhole.com/
Here is some light reading for you.
Jerry
Hey I like those links Jerry :eyebrownod: Hagens even has the pliers hidehunter is showing off.
I like the idea of borrowing a pair from Doug and then just kind of accidentally misplacing them :innocentwhistle: :shrug:
I was getting giddy and didnt want to have to wait on an ordered pair, thats why I was running around yesterday looking. :sneer:
I noticed last night while looking online again that Cabelas has 7 or 8 different pair. :doh2: Why did I think of that?
Hidehunter you like the ones with the tooth at the end of the jaws better then the ones with the tooth recessed back a little? Thats gonna be be my dilemma...which works better.
I like the ones with the tooth at the end. I am generally using some good size split rings to except for the smaller ones on my blades on my spinnerbaits.
I forgot to add this one that is about 45 minutes from my house.
http://www.jannsnetcraft.com/
Jerry
Thats actually where I ordered all my components Jerry. :eyebrownod: They were a bit cheaper then Barlows
Hidehunter, how do you like those for the smaller rings then? Cause mine are all size 001
I might whip over to Cabelas tonight and grab a pair.
I havent had any problems out of them on any size thus far.
Cabelas had a pair like that in their own brand and I picked one up tonight.
I have no idea how well they work though :huh: Katie wanted to try making one, so I walked her through one and the next thing I know she's doing them all and handing to me to bend shut and put a skirt on em. :shock2:
We had a mini assembly line going. :biggrin:
(https://forum.finsandfur.net/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv54%2FRiverBoy%2FFishing%2Fkatieluremaking-001.jpg&hash=00227a052b29c08c9066ba8084ff7cd4540fc66b)
(https://forum.finsandfur.net/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv54%2FRiverBoy%2FFishing%2Fkatieluremaking-002.jpg&hash=2aa2771328714034965661c06a247ea3197cc8ec)
(https://forum.finsandfur.net/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv54%2FRiverBoy%2FFishing%2Fkatieluremaking-003.jpg&hash=81a150aa7ea425daf30f1018a837335e3005c3cd)
I suppose If I told my daughter they were earring's I could get her to help me like that :confused:
Look's like ya gotta a good Spinner Tech. there Jimbo :highclap:
Looks like you will have no shortage of spinners anytime soon Lol
Oh we will. When the spawn is on, the kids will burn through em like cupcakes at a pot party.
Quote from: FinsnFur on April 14, 2012, 08:26:27 PM
the kids will burn through em like cupcakes at a pot party.
Thats pretty d@mn fast lmao