Here's a look at a Black walnut howler I put together with some cut offs I had laying around. Decided I had room to carve a coyote on it. So here's the progression:
(https://forum.finsandfur.net/proxy.php?request=http%3A%2F%2Fi3.photobucket.com%2Falbums%2Fy95%2FHuntnCarve%2FAugust%25202016%2FRoughing%2520In%25201A_zpsuxlqmm3f.jpg&hash=b8e383a46849cbcff86b9148d7a1873b403417e1) (http://s3.photobucket.com/user/HuntnCarve/media/August%202016/Roughing%20In%201A_zpsuxlqmm3f.jpg.html)
(https://forum.finsandfur.net/proxy.php?request=http%3A%2F%2Fi3.photobucket.com%2Falbums%2Fy95%2FHuntnCarve%2FAugust%25202016%2FRoughing%2520In%25201B_zps8alifbg9.jpg&hash=a81143563b8b2687c1888cdc0d595a84f776b3ba) (http://s3.photobucket.com/user/HuntnCarve/media/August%202016/Roughing%20In%201B_zps8alifbg9.jpg.html)
(https://forum.finsandfur.net/proxy.php?request=http%3A%2F%2Fi3.photobucket.com%2Falbums%2Fy95%2FHuntnCarve%2FAugust%25202016%2FRoughing%2520In%25201C_zpsgowkumdk.jpg&hash=44eeb9f343c53e418d5468de6dee3bc4cb8dcd77) (http://s3.photobucket.com/user/HuntnCarve/media/August%202016/Roughing%20In%201C_zpsgowkumdk.jpg.html)
(https://forum.finsandfur.net/proxy.php?request=http%3A%2F%2Fi3.photobucket.com%2Falbums%2Fy95%2FHuntnCarve%2FAugust%25202016%2FStart%2520of%2520Paint%25201A_zpsbm6fref6.jpg&hash=3523d0836f2e2779040ff17df189193f8a1d0039) (http://s3.photobucket.com/user/HuntnCarve/media/August%202016/Start%20of%20Paint%201A_zpsbm6fref6.jpg.html)
(https://forum.finsandfur.net/proxy.php?request=http%3A%2F%2Fi3.photobucket.com%2Falbums%2Fy95%2FHuntnCarve%2FAugust%25202016%2FFinished%2520Call%25201C_zps4lplz7bo.jpg&hash=eaba4dc157aa5a0d850fe9908c0d410cd6c4f55f) (http://s3.photobucket.com/user/HuntnCarve/media/August%202016/Finished%20Call%201C_zps4lplz7bo.jpg.html)
(https://forum.finsandfur.net/proxy.php?request=http%3A%2F%2Fi3.photobucket.com%2Falbums%2Fy95%2FHuntnCarve%2FAugust%25202016%2FFinished%2520Call%25201D_zps6kgt6rpf.jpg&hash=cb8da01fd477d79bf9ba7ee2a40bd873c673b243) (http://s3.photobucket.com/user/HuntnCarve/media/August%202016/Finished%20Call%201D_zps6kgt6rpf.jpg.html)
Thanks for looking!
HuntnCarve
Dave
What's the price on that one? I got a couple guys coming from iceland to hunt again and it may be a good idea to give one of them that so they have something to look at and compare when they come running in. :wo:
Barry, I sent you a PM.
Dave
Well if you had answered here I'd of seen it sooner. :innocentwhistle:
Is that a Dremel type tool that you use for the carving?
Nasty,
That is a SCM air powered engraver. It spins at 400,000 RPMs and will cut anything (steel, glass, wood, etc). It will stall out if too big a cut is taken. Being air powered, there is no damage if it stalls. Where as, if you stall an electric motor, you will damage the motor. I've worn out a air turbine or two nearing 2 decades. Can't tell you how many calls I've carved over those years. :shrug:
Dave
Neat!
Beautiful :congrats: :congrats:
Pat
Awesome as always!!
Jim