Print Page - Osage call

Title: Osage call
Post by: Tjones on July 24, 2008, 10:26:30 AM

I recently got my hands on some Osage. I was hoping when I got it it would be at least 2" thick so I could turn it on the end grain like a call I made a while back. When I got the wood it was all cut to 1 1/2, which is fine for turning with the grain but I feel is to short to go end grain. I went through the pieces and found what I thought were two pieces that use to be one so I glued them back together, and went to turning, put a finish on it and a Carver Ruthless Rabbit tone board, here is what I came with,,,,

Guests are not allowed to view images in posts, please Register or Login

Guests are not allowed to view images in posts, please Register or Login

Guests are not allowed to view images in posts, please Register or Login

Guests are not allowed to view images in posts, please Register or Login

Title: Re: Osage call
Post by: coyote101 on July 24, 2008, 11:57:13 AM

It looks good Tony, nice job.

Pat

Title: Re: Osage call
Post by: WhiteHare on July 24, 2008, 09:04:00 PM

Looks good Tony. Real nice finish. What'd ya use?

Title: Re: Osage call
Post by: John_NY on July 24, 2008, 10:16:58 PM

I like the bell on the end. Very pretty wood. I wish I could get some more carver boards.

John

Title: Re: Osage call
Post by: blacky on July 25, 2008, 07:16:34 AM

I like it a lot.

FinsandFur.net Forums

Hunting => Game Calls => Topic started by: Tjones on July 24, 2008, 10:26:30 AM