Text only | Text with Images

FinsandFur.net Forums

Fishing => Fishing Equipment => Topic started by: SCcoyotehunter on January 04, 2009, 06:55:52 PM

Title: Boat customizing pictures
Post by: SCcoyotehunter on January 04, 2009, 06:55:52 PM
I thought it would be neat to see everyones ideas they have used in their jon boats to make life on the water a little easier. I will post a  few of my projects here. Maybe we can get some ideas from each other.
Guests are not allowed to view images in posts, please Register or Login

Here is a carpeting job I did in my boat this year.
Title: Re: Boat customizing pictures
Post by: FinsnFur on January 04, 2009, 07:03:15 PM
Geeeeez, I'd be scared to fish in there. You need a welcome mat to put our shoes on when we take them off and board the vessel. :laf:
Title: Re: Boat customizing pictures
Post by: Todd Rahm on January 04, 2009, 07:06:14 PM
And a Dyson vacuum Jim. LOL  :roflmao:


I  need a boat like that.
Title: Re: Boat customizing pictures
Post by: SCcoyotehunter on January 04, 2009, 07:30:04 PM
Here is a picture after reinstalling all my hardware, seats, etc.
Guests are not allowed to view images in posts, please Register or Login

I built this Console/Livewell with the help of a friend. This boat was just the trailer, boat and a 15 horsepower when I bought it. I have fixed it up just the way I wanted. I could have probably bought a nice bass boat for the money  I spent on this thing fixing it up, but who cares.
Guests are not allowed to view images in posts, please Register or Login

I bought these mop and broom hangers from Lowe's. They work perfect for holding my rods on the side of the boat.
Guests are not allowed to view images in posts, please Register or Login

I used golf club bag tubes on the other end.
Guests are not allowed to view images in posts, please Register or Login

My latest project is my most prized. I just upgraded to a 2004 model 30 HP with a power tilt and trim jack plate. Got this thing for a steal. I bought the motor for $1300 and the jack plate for $300. The motore has hardly even been used. In fact the guy I bought it from ran it once in the two years he owned it.
Guests are not allowed to view images in posts, please Register or Login

I do have a 1985 Johnson 30HP long shaft for steering cable motor if anyone is interested? Haha
I need to get rid of it, runs great!
Guests are not allowed to view images in posts, please Register or Login


Title: Re: Boat customizing pictures
Post by: FinsnFur on January 04, 2009, 10:38:26 PM
I hit my head on the desk and kinked my neck looking at that first pic, but looks like ya done a good job. :biggrin:
Title: Re: Boat customizing pictures
Post by: pitw on January 05, 2009, 08:53:34 AM
That there look's like a good job done.  I really like the rod holder's and may have to incorporate them in my boat. 
Text only | Text with Images