STATIC Electricity SUCKS !!!!!!!! how to stop it ???

[ohiobob]

Hey Guys
When I Reload Rifle and Pistol rounds the damn Static electricity starts to make the Powder "Stick" to the sides of the Funnel when I dump it in the Cartridge after about 15 Rounds 
I use to do like the "old timers" use to tell me ,,washing my funnels in SOAPY Water using Dish washing soap,,,BUT after a few rounds the "sticking" is back 
My Question is this,,HOW do you guys battle this problem ? I just did an Experiment yesterday AND Today,,what I DID
Was Buy a small bottle of Anti-Fogging & Anti Static Eye Glass cleaner,,I put a good amount on a rag and wiped the funnel down pretty good,,INside & OUTside,,I Made sure I got the Inside Bottom REAL GOOD ! and let it dry for about 20 Minutes
Last night I dumped about a LB. of powder through the funnel and Repeated dumping another pound of Powder through it today,,it NEVER STUCK to the funnel at all,,maybe 3 -6 pieces here & there but I rap on the funnel released the kernels of powder.
DOES ANYONE have another CHEAPER method of keeping Powder from sticking to the side of the Powder Funnel  I DONT feel like giving Wally World another 2 Million Dollars before I die ? 
Thank you VERY MUCH
Bob

[awh]

Bob, SDad used to use a brass funnel. I never got into reloading centerfire thaqt much , but I never heard him say anything about it? I stuck to the shotgun shells seeing how I would shoot his stash up before he got home from work and have to replace them before he found out.

[ohiobob]

Danny
Just remember that when Cam is a little older  hell I havent seen a Brass Funnel in YEARS,,DAMN I am getting old !
Thanks for the tip Danny
Bob

[Hawks Feather]

You can try the cloths like Cling Free or whatever you or your wife uses in the dryer.  They work pretty well and don't cost much.  I also have a spray can of Static "stuff" (I am not in the basement to look) from Radio Shack, but usually use the Cling Free cloths.  I usually wipe down the measure, drop tubes, and any funnels every couple of months.

Jerry

[FinsnFur]

I've heard the dryer sheets routine also. Read it somewhere, apparently it works.

As far as the anti static spray, I think that lasts the longest. It's available in grocery stores. Women use it to prevent those nylon dresses from sticking to thier legs and riding up.

I used to work in a wire harness factory, and the static that come off some of those rolls of plastic coated copper would drop a grown man. We all had a can of anti static spray in our back pocket and hit the spools with it before we started feeding wire off em.
It seemed to last a long time to.

[ROOSTER]

I use dryer sheets . Works good and lasts a good while before ya have to wipe it down again.

[ohiobob]

I Thought about trying the dryer sheets and I thought to myself,,that shit will NEVER WORK,,its TO obvious    ,,well looks like the joke is on me huh ?  as usual 
Thank you Guys
Bob

[RShaw]

I just use the drop tube and tap on the side of the funnel.

Randy

[Mallardsr]

http://www.gndzero.com/grounding_table_matting_custom.html

Long and short of it all is Ground your table.

[5 SHOTS]

I got some Vis Wis (I think) for cleaning dust off scope lenses and tried it on my funnels, it is still working over a year later.

[ohiobob]

5 Shots

Vis Wis,,sounds like something "certain" people use to beat a urine test at work  its funny because a Guy at work was ALWAYS trying to figure out how to beat these test's  and 1 day at work he said he is going to buy a
Whizzinator,well when he told us what it was I almost bust my gut  :roflmao: :roflmao: :roflmao: :roflmao:
Thats why when I seen your post had Wis in it I had to chuckle
BUT I am going to go the routes you guys told me about and hope Im done with the static B.S. because I am planning on loading a LARGE amount of AMMO here REAL SOON 
Thank you ALL once again
Bob