• Welcome to FinsandFur.net Forums.
Main Menu

Just a little sharing.

Started by Hawks Feather, August 13, 2009, 12:18:21 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Hawks Feather

I have been asked to do a presentation on call making this Saturday and thought that I would show them how to get the parts assembled and what it could look like when finished. 


Here are the three pieces of stock that I will be using for “props”.  The first is taped together since the three pieces are loose.  They have been set up with a mortise and tendon so they will see how to get a little stronger glue joint.  The second has already been glued and the bore drilled.  Then there is the one on the right that just sort of sits there thinking what the heck happened to me?



Here is a little better picture of the final product.  The center is from a piece of Cherry Burl (given to me by my gunsmith Mark Penrod) and the ends are Blackwood.  It felt pretty good to be turning a call again.

Jerry

straycat

Very nice,Jerry. You make that toneboard? Sets the call off nicely.
"If you're going to be a smartass, you'd better start by being smart before you start being an ass."

Never put both feet in your mouth at the same time, because then you won't have a leg to stand on.

HuntnCarve

Looks like you haven't forgotten how to make a call Mr. Jerry!  Very nice!  The folks on Saturday will be in for a real treat, and will be learning from a top notch call maker.


Todd Rahm

At the end of the demo are ya gona give that cal away to one of the lucky audience members?  :biggrin:

Or wait, you might want to keep that call to go with the other two demo pieces in case ya do another presentation.  :wink:

FinsnFur

I've never seen them glued up myself. Kinda cool.  :congrats:
Fins and Fur Web Hosting

   Custom built websites, commercial/personal
   Online Stores
   Domain Names
   Domain Transfers
   Free site maintenance & updates


http://finsandfurhosting.com

iahntr

People can be pretty surprised with the
end result, when they see what it started
out as.   :wink:
Lookin good!  :highclap:
Scott
Scott

HaMeR

Quote from: iahntr on August 13, 2009, 05:48:00 PM
People can be pretty surprised with the
end result, when they see what it started
out as.   :wink:
Lookin good!  :highclap:
Scott

YEP!! That's the neatest thing about turning. You can purdy much tell what you got on a flat board project but the lathe will usually throw you a curve.  :eyebrow:
Glen

RIP Russ,Blaine,Darrell

http://brightwoodturnings.com

2014-15 TBC-- 11

pitw

That is more than I've ever seen and may I say that the people you are showing this to will be in awe :bowingsmilie: :bowingsmilie:  That is way cool and I thank you for showing it to me. ;yes;
I say what I think not think what I say.

HaMeR

Glen

RIP Russ,Blaine,Darrell

http://brightwoodturnings.com

2014-15 TBC-- 11