• Welcome to FinsandFur.net Forums.
Main Menu

lathe chucks

Started by riverboss, December 12, 2011, 05:39:37 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

riverboss

I have a mini lathe i dont have a clue what brand it is how can i tell if it uses mt1 or mt2 shafts?Im wanting to buy a 3 jaw chuck and some expanding mandels any help would be appreciated.

Hawks Feather

Measure the large opening (where the insert would go)
Morse Taper #1 is 0.475
Morse Taper #2 is 0.700

Normally the chuck will screw onto the lathe so you will need to know that thread.

Jerry

iahntr

yep, 12mm or 18 mm (roughly)
Scott

riverboss