Early Xmas present.

[nastygunz]

THE HISTORY OF BUCK KNIVES

About /
Company
/ History
BUCK. INGENUITY RUNS IN THE FAMILY.

A young Kansas blacksmith apprentice named Hoyt Buck was looking for a better way to temper steel so it would hold an edge longer. His unique approach produced the first Buck Knife in 1902. Hoyt made each knife by hand, using worn-out file blades as raw material. His handiwork was greatly appreciated during World War II. Hoyt's eldest son Al had relocated from the Pacific Northwest to San Diego California after finishing a stint in the navy a decade earlier. Hoyt and his wife Daisy moved in with Al and his young family in 1945 and set up shop as H.H. Buck and Son

Following the death of his father, Al kept the fledgling custom knife business going until incorporating Buck Knives, Inc. in 1961. Al introduced his son, Chuck, to the knife business at an early age and Chuck and his wife, Lori, were both involved when the company was incorporated. In 1964, the knife industry was revolutionized with the introduction of the Model 110 Folding Hunter, making Buck Knives a leader in the field. A position we hold proudly today.

Chuck worked his way up through the company serving as President and CEO for many years before handing over the reins to his son, CJ, in 1999. Chuck remained active as Chairman of the Board until his passing in 2015. Lori now serves on the Board of Directors and is actively involved with Buck promotional events throughout the U.S., continuing Chuck's legacy.

CJ, the 4th generation family member to run Buck Knives and current CEO, President, and Chairman, started out with the company on the production line in 1978. He has been quoted saying, "We have been helping people thrive with reliable and trustworthy edged products for over a century. Since our own name is on the knife, our quality, focus, and attention to detail is very personal."

Hoyt and Al Buck's ingenuity may have put the company on the map. But it is our ongoing commitment to developing innovative new products and improving what we have by third and fourth generation Buck family members that have made Buck the successful knife maker it is today. Frankly, it's what our customers expect from a Buck.

[Hawks Feather]

You say that you are a person who appreciates Buck knives. How many of these sew on patches do you have from the 80s? At that time most dealers would give you a patch for every Buck knife you purchased.

[bigben]

I have had a few buck knifes in the past.  This past season a buddy picked up a 110 cheap.  I bought it off him for a few dollars more and honestly feel its one of the best all around deer skinners i used.  this one was made early on dont remember the year.  but its weathered a bit but holds an edge nicely

[FinsnFur]

Loved my buck. Never had no patches though

[Hawks Feather]

Loved my buck. Never had no patches though

First person to comment on the patches. Seems like they were meant to be yours.  Watch your mail.

Merry Christmas 🎁

[bigben]

When I was a kid dad gave me what I thought was a buck 110 knife.  it had serrations on the back of the blade for grip.  I never knew any better and moved on to other blades.  This summer when my bud offered me that 110 I dug out that old one I thought was a buck.  I pulled it out of the nylon flo orange camo sheath and opened it up.  Still a little greasy from the last deer I probably gutted with it and it said china right where buck should be.  I did some more research and sure enough even back in the 90's they tried to copy them.  I cleaned it up and threw a good edge on that sucker and put it back in my drawer full of stuff.  One of the neatest things about it it has a two finger zipper blade that was held in the same sheath and the sheath even says buck on it.  but as far as I know buck never made anything in china.  and there is nothing on the knife that states it is a buck knife other then the shape and size. 

I have been looking for a sheath for mine as well as one of those two finger zipper things for gut opening. 

[nastygunz]

https://www.lazerdesigns.com/blog/where-are-buck-knives-made-china-usa/#:~:text=Many%20Buck%20Knives%20are%20made,where%20each%20knife%20is%20made.

[nastygunz]

https://www.buckknives.com/blog/buck-history-celebrating-15-years-in-idaho/

[nastygunz]

By Buck Knives
Buck Knives is a family business with a dedication to creating quality products. With a strong heritage and a long-standing family legacy, the people of Buck are all part of a large family that possess the dedication, skill, and determination necessary to uphold the high quality standards that continue to drive the company today.

Fifteen years ago, after being faced with economic challenges in California, Buck Knives relocated to Post Falls, Idaho. With a firm decision to continue manufacturing in the United States and a commitment to continue providing innovative products, relocation was necessary. Although the process was not a smooth transition, it was a choice that was very crucial for the future of Buck.

The Pacific Northwest is rich in hunting, fishing, hiking, camping, and other recreational opportunities and is home to a supportive community that has contributed to the overall success of Buck Knives.  With the manufacturing capacity to build thousands of knives a day, Buck proudly employs over 300 employees in its Post Falls, Idaho facility, each possessing a shared interest and commitment to quality and reliability.

[bigben]

I knew the one in the orange sheath was a fake.  I think I found the exact same article you posted nasty.  just surprised me that the sheath said buck.

[FinsnFur]

Loved my buck. Never had no patches though

First person to comment on the patches. Seems like they were meant to be yours.  Watch your mail.

Merry Christmas 🎁

Thy mail hath arrive 



Thanks Jerry!
Theyre going right into my son in laws stocking 
He collect things like this.
And vintage toy tractors...

[Okanagan]

Niiiice!

[Hawks Feather]

Glad that they made it in time for Christmas.

[msmith]

Very nice! Buck knives are great.

I used to live in Lakeside CA which is just a few miles from El Cojon where Buck knives were made. I drove through there every day to get to NAS Miramar where I was stationed. I could kick myself because I had always intended on stopping by but never did.