Homemade target stand

[HaMeR]

I slid a 3/8" all thread rod inside a 1/2" steel pipe. Then I slid that inside the 3/4" PVC pipe. I used black iron tees & nipples to fashion the foot pegs. The PVC is all screwed together with zip screws for when somebody decides to shoot that instead of the target. The all thread & steel tubing is epoxied together. The plastic type cardboard is zip tied to the PVC frame. The backboard will hold two 8x11 five dot targets side by side with plenty of room around the edges to NOT hit the PVC. In theory anyhow.   









Plans are available for $49.99.   

[FinsnFur]

The plans are 50 bucks? 
What is there in material $11.00 bucks?


I like it. I was going to ask you what you were calling a zip screw, but I see them.

[HaMeR]

  ONLY $49.99 Jim!!!!!!!!!    Now I aint never gonna sell any!! 


Actually since I only had the screws, zip ties, nuts, epoxy, & backer laying around here all those pieces parts were about $50. 

[KySongDog]

I have heard that some guys find their target stands sprouting from yards at night.     

[HaMeR]

   You aint helping me sell any of these plans either Semp!! 




I have heard the same thing. Don't know how true it is but I've heard of that happening!! I''ve also heard those political litterings make good ones too. 

[Hawks Feather]

I have a couple of these that I actually got from a realtor when they started to rust.  Seems he thought it would be easier to buy new than wire brush and repaint them.  Worked for me.  Since I take some shooters out who are not always hitting the target and have been known to shoot the frame, they might survive longer than PVC tubes.

That being said, HaMeR's plans for $49.99 would be a great way for HaMeR to get some reloading components or even a new rifle if he sells enough of the plans.

Jerry

[HaMeR]

Looking for a little kick back there Jerry?? 

Ya done good if you are. Once the orders start rolling in I'll put you on the HaMeR Stand Pro Staff!! 

[Hawks Feather]

Don't let anyone know, but it sounds like a good plan to me.

Jerry

[HaMeR]

okee dokee

[FinsnFur]

Looking for a little kick back there Jerry?? 

What a couple nutjobs

[coyotehunter_1]

Here's a site that offers several free downloadable & printable targets (to go along with HaMer's fancy high-tech target stand ). 

http://www.mytargets.com/   

[HaMeR]

That is a good site too Chet. Thanks for adding to the thread. Unlike some folks who seem to want to hi-jack one of my finally useful posts. 














.....

[Hawks Feather]

Here's a site that offers several free downloadable & printable targets (to go along with HaMer's fancy high-tech target stand ). 
http://www.mytargets.com/   

Coyotehunter_1 forgot to add that for a limited time, and a limited time only, this link will be provided FREE, that's right, at absolutely NO COST to the first 15 people that purchase a set of HaMeR's target frame plans.  As you know these plans have been featured on the internet and have gotten some rave reviews.  And at the price that they are being offered they won't last long.  So act now!


Jerry   aka: sales rep for HaMeR frames and Coyotehunter_1 targets

[coyote101]

Maybe HaMeR could auction a set of plans to help fund the new FnF chat. I know I'd bid.

Thanks for the link Chet.

Pat

[FinsnFur]

 
I would too.

[HaMeR]

NOW ACCEPTING BIDS STARTING AT.........





$49.95

[FinsnFur]

$499.5!!!

[HaMeR]

$499.5!!!

Well if you want one for that I'll give you a cut too!! 

[Carolina Coyote]

I was going to Post a Target here but my Puter is screw up again.  cc

[HaMeR]

When you get it working Carl just post it up then.